Yamaha AX-10 Stereo Amplifier User Manual


 
8
Adjusting the BASS and TREBLE
controls
Adjusting the BALANCE control Selecting the SPEAKER system
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused from
speaker location or listening room conditions.
Because one or two speaker systems can be connected to this
unit, the SPEAKERS switches allow you to select speaker
system A or B, or both at once.
BASS : Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
Using the PURE DIRECT switch
You can enjoy the purest possible sound from your audio
sources by pressing this switch so that the PURE DIRECT
indicator lights up. By doing so, the audio signal bypasses the
BASS, TREBLE, BALANCE controls and the PRE OUT/MAIN
IN terminals, eliminating any alterations to the audio signal.
Open/close the control door
When it is not necessary to operate controls inside the control
door, close the door.
To close the door
To open the door
BALANCE
LR
SPEAKERS
ON
OFF
AB
ON
OFF
BASS TREBLE
0
–+ +
0
PURE
DIRECT
PURE
DIRECT
Lights up.