Yamaha HTR-5850 Stereo System User Manual


 
57
SET MENU
ADVANCED
OPERATION
Use the remote control to access and adjust each
parameter.
y
You can change SET MENU parameters while the unit is
reproducing sound.
You cannot change some SET MENU parameters while the unit
is in either cinema or music night listening mode.
1 Press AMP.
2 Press SET MENU.
“BASIC SETUP” appears in the front panel display.
3 Press u / d to display MANUAL SETUP.
MANUAL SETUP
4 Press ENTER to enter MANUAL SETUP.
1 SOUND MENU appears in the front panel display.
1 SOUND MENU
5 Press u / d to display the desired menu.
6 Press ENTER to enter the displayed menu.
Repeat steps 5 and 6 to navigate to and enter the
items you want to adjust.
To return to the previous menu level, press RETURN.
7 Press u / d to select the item you want to
adjust, then press j / i to change the setting
of the item.
Repeat this operation to select and adjust each setting.
To return to the previous menu level, press RETURN.
8 To exit, press SET MENU when finished.
Using SET MENU
Note
AMP
REC
AUDIO
MUTE
MENUTITLE
VOLUME
SET MENU
BAND
FAVOR.
ALL CH
LEVEL
SRCH MODE
A-E/CAT. A-E/CAT.
STRAIGHT
MOVIE
ENTERTAIN
MUSICSTEREO
4321
8
10
7
09
65
ENT.
DIRECT ST.
EXTD SUR.
STANDARD
SELECT
NIGHT
AB
SPEAKERS
EFFECT
DISPLAYRETURN
TV MUTE TV INPUT
TV VOL TV CH
ENTER
VCR
PRESET/CH
MEMORY
3-7
1
2,8
1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
01EN_HTR-5850_U.book Page 57 Tuesday, January 18, 2005 7:25 PM